Lubrication; General Information - DURKOPP ADLER 806 Service Instructions Manual

2.10 Lubrication

1
17
16
15

2.10.1 General information

2 3 4
18
14 13 12
–
The wicks used for the lubrication of the respective elements in the
machine head should not touch the re-circulation wick.
–
The plastic cap on the hook impedes the suction of dust and fluff
into the hook case by the vacuum pump.
–
The oil splash screw 22 ensures that enough oil is supplied to the
22
collecting sheet even if the oil level is very low..
–
When completing the machine or following a longer machine stop,
lubricate the "dried up" wicks before restarting the machine,
because an insufficient lubrication can cause damages.
–
The slotted screw 24 under the lubrication adjustment screw 23
can be turned out, so that any obstructions of the oil ducts in the
23
hook race can be eliminated by a blowing gun.
24 Turn-in the screw 24 completely.
5 6 7
19 20 21
11
8
10 9
27