General Information - DURKOPP ADLER 806 Service Instructions Manual

5. Plug
5.1

General information

–
The stacker version with a roller enables stacking of parts the
lower edge of which is at least 310 mm from the seam end.
Normally, this requirement for all trousers and shirt parts.
The stacker version with an additional roller enables stacking of
parts the lower edge of which is distanced 130 and 310 mm from
the seam end.
–
The stacker can be switched off only under the function "stacker
choice", for instance for the manual removal of a workpiece with
the pocket already set on it.
–
The rest can be turned 180°. The side with the recess is intended
for stacking of shirts with button band. For all other parts use the
side without recess.
83