Position Of The Opened Inner Shackle; Position Of The Opened Outer Shackle - DURKOPP ADLER 806 Service Instructions Manual

5.4

Position of the opened inner shackle

5.5

Position of the opened outer shackle

86
1
2
3
4
5
6
Caution: Danger of bodily injuries !
The machine must be in the "Safe motor stop" position.
Rule and control
The opened inner shackle 1 should be, in horizontal direction, about
10 mm from the fabric rest.
–
Check the position in the initial position of the machine.
Correction
–
Loosen clamping screw 1.
–
Change the position of the shackle accordingly.
–
Retighten the clamping screw.
Caution: Danger of bodily injuries !
Do not introduce your hands into the area of the moving machine parts.
Rule and control
The opened outer shackle 5 should be about 3 mm from the covering
of the lifted ejection rollers 4 when the rest 6 is advanced.
–
Select the "Single step mode" function.
–
Press the "Start" key as often as required.
Correction
–
Loosen the clamping screw.
–
Change the position of the shackle accordingly.
–
Retighten the clamping screw.