Maintenance - DURKOPP ADLER 806 Service Instructions Manual

14.

Maintenance

Work to be carried out
Machine head (class 806-111)
- Remove fluff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Check oil level in oil sump . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Check oil supply through sight glass . . . . . . . . . . . . . . . . . . . . . .
- Control the belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Control hook lubrication
Pneumatic system
- Check water level in pressure regulator . . . . . . . . . . . . . . . . . . . . .
- Clean filter element in the conditioning unit
- Check tightness of the pneumatic system
Transfer carriage
- Clean guide rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Clean toothed belt by compressed air gun . . . . . . . . . . . . . . . . . . .
- Clan splined shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Clean the linear route rails . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vacuum
- Check and clean inner framed hole opening . . . . . . . . . . . . . . . . . .
- Check vacuum fields in the table top, ensure that the holes are free . . . . .
Screw off lower plate, loosen knurled screw and clean by compressed air
- Clean outgoing air silencer housing . . . . . . . . . . . . . . . . . . . . . . .
Electrical system
- Clean ventilation grid and control unit . . . . . . . . . . . . . . . . . . . . . .
Caution: Danger of bodily injuries !
Turn off main switch.
Switch off the machine before proceeding to the maintenance of the
machine.
Daily and weekly maintenance work to be carried out by machine
operators (cleaning and lubrication is described under
Part 1 of the Operating Instructions. This work is compiled in the
following tables.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
Service hours
8 40 160 500
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
115