Adjusting The Lateral Position Of The Movable Knife - DURKOPP ADLER 967 Instruction Manual

Adjusting the thread cutter
Setting steps
1. Put the handwheel into the 270° position ( p. 20).
2. Swing out the movable knife (2).
3. Loosen the screw (5).
4. Move the lever of the movable knife (6) aside so that the axis (tip) of the
5. Gently tighten the screw (5) so that the lever (6) can be turned on the
6. Restrain the stop lever (3) in the park position and turn the lever (6) so
7. Tighten the screw (5).

14.4 Adjusting the lateral position of the movable knife

Proper setting
The fixed knife (1) must be in line with the movable knife (2) on both sides.
Cover
• Throat plate ( p. 15).
• Feed dog ( p. 16).
• Tilt the machine head ( p. 10).
Fig. 55: Adjusting the lateral position of the fixed knife
①
②
(1) - Fixed knife
(2) - Movable knife
Setting steps
1. Loosen the screws (3).
2. Move the bracket (4) sideways so that the fixed knife (1) is parallel to
3. Tighten the screws (3).
Service Instructions 967 - 02.0 - 12/2015
needle (1) is at the left edge of the gully of the movable knife (2).
shaft (4) with slight frictional torque.
that the marking on the knife (7) is covered by the blade of the fixed
knife (8).
the movable knife (2).
(3) - Screws
(4) - Bracket
④
③
79