Ricoh MP 161 Function Manual page 57

C
Enter the e-mail address destination, and then press the {OK} key.
If you enter an incorrect character, press the {Clear/Stop} key. Then, re-enter
the characters correctly.
To change the e-mail address after pressing the {OK} key, press [EditDest], re-
enter an e-mail address, and then press the {OK} key.
D
To add a destination, press [Add Dest].
E
Specify the next destination.
To add another destination, repeat steps
F
Specify the sender.
For details about specifying senders, see "Sender Settings".
G
Press the {Start} key.
The machine starts to scan the original and stores it in memory. When scan-
ning ends, the Communicating indicator lights and transmission starts.
Specifying a Destination
D E
and .
1
49