More Transmission Functions; If Memory Runs Out While Storing An Original; Checking The Transmission Result; Broadcasting Sequence - Ricoh FAX3310LE Operating Instructions Manual

More Transmission Functions

If Memory Runs Out While
Storing an Original
A A A A
If you run out of memory while
storing an original (free space
r e a c h e s 0 % ) ,
Full.Storing Stopped."
played.
B B B B
Press the { { { { OK} } } } key.
When transmitting the stored
pages
A Press 0 0 0 0 or 1 1 1 1 to select "Trans-
mit" and press the { { { { OK} } } } key.
Note
❒ Successfully scanned pages
are sent. Check the number
o f t r a n sm i t t ed p ag e s o n
Communication Result Re-
port.
When deleting the stored pages
A Press 0 0 0 0 or 1 1 1 1 to select "Delete"
and press the { { { { OK} } } } key.
" M e m o r y i s
is dis-
More Transmission Functions
Checking the Transmission
Result
• Turn on the printing of the Com-
munication Result Report if you
want a report to be printed after
every successful transmission. See
p.30 "Printed Reports".
If you leave off the printing of the
Communication Result Report, the
report will not be printed after ev-
e r y t r a n s m i s s i o n . H o w e v e r ,
should a transmission fail, a Com-
munication Failure Report will be
printed instead.
• If you turn off the printing of the
Transmission Result Report (Im-
mediate Transmission), the Error
Report will be printed when the
communication on fails.
• You can also check the transmission
result by examining the Journal.
See p.16 "Printing the Journal".
• You can assign the function of
printing Transmission Result Re-
port to User Function Keys.

Broadcasting Sequence

If you dial several destinations for the
same message (Broadcasting), the
messages are sent in the order in
which they were dialed. If the fax
message could not be transmitted to a
destination, the machine redials that
destination after the last destination
specified for Broadcasting. For exam-
ple, if you specify four destinations A
through D for broadcasting, and if the
lines to destinations A and C are
busy, the machine dials the destina-
tions in the following order: A, B, C,
D, A, and C.
3
27