Print Modes
Select a Print Mode
Caution • The cutter blade is sharp. Do not rub or touch the blade with your fingers.
9. Feed the labels through the cutter mechanism.
10. Flip up the media supply guide.
11. Slide in the media guide and media supply guide so they just touch, but do not
restrict, the edge of the roll.
12. Before closing the printhead, make sure that:
• The labels are positioned against the inside guides.
• The labels are taut and parallel with the pathway when wound onto the rewind
spindle or core.
13. Close the printhead.
46
Bradyprinter THT X-Plus II Series User Guide