Select A Print Mode; Tear-Off Mode - Brady Bradyprinter THT 300X-Plus II Manual

Print Modes

Select a Print Mode

Select a Print Mode

The options on your printer may let you set up additional print modes. Use the front
panel controls to set up the printer to the print mode that you wish to use.
The following are the available print mode selections:
• Tear-off
• Peel-off
• Cutter
• Rewind
• Applicator (used only if a machine will apply printed labels to something)
To select a print mode, complete these steps:
1. From the front panel, press SETUP/EXIT.
2. Press NEXT/SAVE until the LCD reads PRINT MODE.
3. Use the right or left oval to scroll though the choices. Be sure to select a print mode
that your hardware supports—some of the selections displayed are for optional
printer features.
4. To save your selection, press SETUP/EXIT.

Tear-Off Mode

See Load the Printer
42
on page 22 to set up labels in Tear-Off Mode.
Bradyprinter THT X-Plus II Series User Guide