Brady Bradyprinter THT 300X-Plus II Manual page 114

Front Panel Controls
Front Panel LCD
LCD Description
Setting Parity
PARITY
The parity of the printer must match the parity of the host computer for
accurate communications to take place. Select the parity that matches the one
being used by the host computer.
• Press the right or left oval to display other choices.
Default: None
Selections: None, Even, Odd
Setting Host Handshake
HOST
HANDSHAKE
The handshake protocol of the printer must match the handshake protocol of
the host computer for proper communications to take place. Select the
handshake protocol that matches the one being used by the host computer.
• Press the right or left oval to display other choices.
Default: XON/XOFF
Selections: XON/XOFF, RTS/CTS, DTR/DSR
Setting Protocol
PROTOCOL
Protocol is a type of error checking system. Depending on the selection, an
indicator may be sent from the printer to the host computer signifying that data
has been received. Select the protocol that is requested by the host computer.
Further details on protocol can be found in the ZPL II Programming Guide.
• Press the right or left oval to display other choices.
Default: None
Selections: None, Zebra, ACK/NACK
Note • Zebra is the same as ACK/NACK, except that Zebra response
messages are sequenced. If Zebra is selected, the printer must use DTR/DSR
host handshake protocol.
86 Bradyprinter THT X-Plus II Series User Guide