Front Panel Lights - Brady Bradyprinter THT 300X-Plus II Manual

Front Panel Lights

This table details the lights shown in the illustration on
Light Details
POWER Indicates printer power status.
• Off — printer is off.
• On — printer is on.
• Off — Normal operation.
TAKE LABEL
• Flashing — (Peel-Off Mode only.) The label is available. Printing is
ERROR Indicates printer operation.
• Off — printer is in Normal operation.
• Flashing — printer pauses until the label is removed.
• Off — Normal operation; ribbon (if used) is properly loaded.
CHECK RIBBON
• On — No media is under the label sensor. Printing is paused, the LCD
PAPER OUT Indicates that labels need to be reloaded.
• Off — normal operation.
PAUSE
• On — all printing operations have stopped. Either PAUSE was pressed, a
• Off — Normal operation. No data being received or processed.
DATA
• On/Blinking — Data processing or printing is taking place. Data is being
Bradyprinter THT X-Plus II Series User Guide
paused until the label is removed.
shows an error message, and the PAUSE light is on.
pause command was included in the label format, the on-line verifier
detected an error, or a printer error was detected.
received.
Introduction
Front Panel
page 2.
5