Brady Bradyprinter THT 300X-Plus II Manual page 115

LCD Description
Setting Network ID
NETWORK ID
Network ID is used to assign a unique number to a printer used in an
RS-422/RS-485 network. This gives the host computer the means to address a
specific printer. If the printer is used in an RS-422/RS-485 network, you must
select a network ID number. This does not affect TCP/IP or IPX networks.
1. Press the left oval to move to the next digit position.
2. Press the right oval to increase the value of the digit.
Default: 000
Range: 000 to 999
Setting Communications Mode
COMMUNICA-
TIONS
The communication diagnostics mode is a troubleshooting tool for checking
the interconnection between the printer and the host computer. When
DIAGNOSTICS is selected, all data sent from the host computer to the printer is
printed as straight ASCII characters, with the hex value below the ASCII text.
The printer prints all characters received, including control codes, like CR
(carriage return). A sample printout is shown in Communications Diagnostics
Test
Notes on diagnostic printouts are:
• FE indicates a framing error.
• OE indicates an overrun error.
• PE indicates a parity error.
• NE indicates noise.
1. Press the right or left oval to toggle between the choices.
2. For any errors, check that your communication parameters are correct.
3. Set the print width equal to or less than the label width used for the test. See
Default: Normal mode
Selections: Normal mode, diagnostics
Bradyprinter THT X-Plus II Series User Guide
on page 127.
on page 137
Label Specifications
Front Panel Controls
for more information.
Front Panel LCD
87