Use Auto Detection For An Ipv6 Internet Connection - NETGEAR LBR20 User Manual

For more information about IPv6 Internet connection, see the following sections:
• Use auto detection for an IPv6 Internet connection on page 35
• Use auto configuration for an IPv6 Internet connection on page 36
• Set up an IPv6 6rd tunnel Internet connection on page 39
• Set up an IPv6 6to4 tunnel Internet connection on page 38
• Set up an IPv6 pass-through Internet connection on page 41
• Set up an IPv6 fixed Internet connection on page 42
• Set up an IPv6 DHCP Internet connection on page 43
• Set up an IPv6 PPPoE Internet connection on page 45
6. Click the Apply button.
Your settings are saved.

Use auto detection for an IPv6 Internet connection

To set up an IPv6 Internet connection through auto detection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select Auto Detect.
The page adjusts.
The router automatically detects the information in the following fields:
• Connection Type. This field indicates the connection type that is detected.
• Router's IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router's WAN (or Internet) interface. The number after the slash (/) is the
Specify the Wired Internet
Settings
4G LTE WiFi Orbi Router Model LBR20
35 User Manual