Installing The Cover; Installing Telephones - Avaya PARTNER Advanced Communications System Quick Reference Manual

Quick Reference Guide

Installing the Cover

If you have a 5-slot carrier, it is important to install the cover to keep the modules
dust-free and properly seated and the system working efficiently.
Perform the following steps to install the cover for the 5-slot carrier:
Position the carrier cover over the modules so that the openings on the top
1
of the carrier cover align correctly with the tabs at the top of the installed
5-slot carrier and modules.
Rotate the carrier cover into position so that it aligns correctly with the
2
thumb screw opening on the bottom of the carrier.
Tighten the thumb screw. To ensure proper alignment and safe operation,
3
tighten the thumb screw securely.

Installing Telephones

After you have installed the control unit and have connected the line and
extension cords, you are ready to install the telephones. Installing the telephones
includes assembling, connecting, and testing the telephones. As desired, you
also can connect an Intercom Autodialer to system telephones at operator
extensions. See the PARTNER Advanced Communications System Release 7.0
Installation, Programming, and Use guide and the documentation that comes
with the telephone.
2 Installing Your System
Installing the Cover 27