Pstn Gateway Features - AT&T Synapse Installation Manual

PSTN Gateway Features

Figure 54 illustrates the PSTN Gateway features and connections.
1. Display
2. Reset
3. PSTN Line Ports 1–4
4. Bypass Port
5. RJ-45 Ethernet Network Port
6. DC 5.1V Power-Supply Jack
Getting Started
Synapse Installation Guide
LINE 1
1
LINE 2
RESET
LINE 3
LINE 4
POWER
2
UP DOWN SELECT CANCEL
Figure 54. PSTN Gateway Features and Connections
Provides system and network status, device information, and configuration data. See
"Gateway Front Panel Interface" on page
When pressed momentarily, restarts the Gateway.
When pressed and held for more than five seconds and with the LAN cable not connected,
restores factory defaults.
Traditional 2-conductor wiring (FXO—Foreign Exchange Office Ports).
Traditional analog POTS (Plain Old Telephone Service) that is available during an AC power
outage. When the Gateway power fails, calls on Line 4 are routed to the bypass line.
10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
LINE 1 LINE 2 LINE 3 LINE 4 BYPASS
4
3
69.
65
DC 5.1V
LAN
- +
5 6