Rack-Mounting And Cabinet-Mounting Warnings For J-Ex Series Switches - Dell PowerConnect J-EX4200 Hardware Manual

Related
Documentation

Rack-Mounting and Cabinet-Mounting Warnings for J-EX Series Switches

Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.
General Safety Guidelines and Warnings for J-EX Series Switches on page 171
Laser and LED Safety Guidelines and Warnings for J-EX Series Switches on page 177
Installation Instructions Warning for J-EX Series Switches on page 183
Grounded Equipment Warning for J-EX Series Switches on page 190
Ensure that the rack or cabinet in which the J-EX Series switch is installed is evenly and
securely supported. Uneven mechanical loading could lead to a hazardous condition.
WARNING: To prevent bodily injury when mounting or servicing the switch
in a rack, take the following precautions to ensure that the system remains
stable. The following directives help maintain your safety:
The switch must be installed in a rack that is secured to the building
structure.
The switch should be mounted at the bottom of the rack if it is the only
unit in the rack.
When mounting the switch on a partially filled rack, load the rack from the
bottom to the top with the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before
mounting or servicing the switch in the rack.
WARNING: Waarschuwing Om lichamelijk letsel te voorkomen wanneer u
dit toestel in een rek monteert of het daar een servicebeurt geeft, moet u
speciale voorzorgsmaatregelen nemen om ervoor te zorgen dat het toestel
stabiel blijft. De onderstaande richtlijnen worden verstrekt om uw veiligheid
te verzekeren:
Chapter 19: Installation and Maintenance Safety Information
185