J-Ex4200 Switch Hardware And Cli Terminology Mapping - Dell PowerConnect J-EX4200 Hardware Manual

Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide
Fan
tray
Related
Documentation

J-EX4200 Switch Hardware and CLI Terminology Mapping

8
Management Ethernet port
Console port
ESD point
Power supply or power supplies
Figure 4 on page 8 shows the rear panel of a J-EX4200 switch. All J-EX4200 switches
have the same rear panel. The 320 W AC power supply is flush with the chassis. The
600 W AC power supply and 930 W AC power supply extend out of the chassis by 2.25 in.
Power cord retainer clips extend out of the power supply by 3 in.
Figure 4: J-EX4200 Switch Rear Panel
Temperature
shutdown LED
Virtual USB Management
chassis port Ethernet
ports port
Field-Replaceable Units in J-EX4200 Switches on page 16
Front Panel of a J-EX4200 Switch on page 6
USB Port Specifications for a J-EX Series Switch on page 29
Cooling System and Airflow in a J-EX4200 Switch on page 24
Power Supply in J-EX4200 Switches on page 21
Prevention of Electrostatic Discharge Damage on J-EX Series Switches on page 198
Connecting Earth Ground to a J-EX Series Switch on page 115
Installing and Removing J-EX4200 Switch Hardware Components on page 105
Understanding Virtual Chassis Hardware Configuration on a J-EX4200 Switch on
page 75
This topic describes the hardware terms used in J-EX4200 switch documentation and
the corresponding terms used in the Junos OS command line interface (CLI). See Table
6 on page 9.
Protective earthing
ESD
terminal (on side panel)
point
Console Power
port Supply 1
Power
Supply 0