Network Port Leds In J-Ex4200 Switches - Dell PowerConnect J-EX4200 Hardware Manual

Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide
Related
Documentation

Network Port LEDs in J-EX4200 Switches

18
All three LEDs can be lit simultaneously.
Front Panel of a J-EX4200 Switch on page 6
For information about active alarms, alarm types, and alarm severity levels, see the
Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS at
http://www.support.dell.com/manuals
Each network port on a J-EX4200 switch has two LEDs. The four figures in this topic show
the location of those LEDs:
Figure 7 on page 18 shows the location of the LEDs on the network ports on the front
panel.
Figure 8 on page 19 shows the location of the LEDs on the uplink module ports on the
SFP uplink module.
Figure 9 on page 19 shows the location of the LEDs on the uplink module ports on the
SFP+ uplink module.
Figure 7: LEDs on the Network Ports on the Front Panel
.