Uplink Modules Connector Pinout Information For J-Ex4200 Switches - Dell PowerConnect J-EX4200 Hardware Manual

Table 20: Optical Interface Support for Gigabit Ethernet SFP+ Transceivers in J-EX4200
Switches (continued)
Ethernet Standard Specifications
10GBase-LR Model Number
Rate
Connector Type
Fiber Count
Transmitter Wavelength
Minimum Launch Power
Maximum Launch Power
Minimum Receiver Sensitivity
Maximum Input Power
Fiber Type
Core/Cladding Size
Modal Bandwidth
Distance
DOM Support
Software required
Related
Documentation

Uplink Modules Connector Pinout Information for J-EX4200 Switches

Uplink Modules in J-EX4200 Switches on page 25
For show interfaces diagnostics optics
J-Series Ethernet Switch Complete Software Guide for Junos OS at
http://www.support.dell.com/manuals
Installing a Transceiver in a J-EX Series Switch on page 110
Removing a Transceiver from a J-EX Series Switch on page 144
J-EX4200 switches have a field-replaceable unit (FRU) uplink module on the front panel.
Table 21 on page 42 provides the uplink modules connector pinout information.
EX-SFP-10GE-LR
10 Gbps
LC
Dual
1310 nm
–8.2 dBm
0.5 dBm
–18 dBm
0.5 dBm
SMF
9/125 µm
–
10 km (6.2 miles)
Available
Junos OS for J-EX Series switches
command syntax, see the Dell PowerConnect
.
Chapter 3: Component Specifications
41