Installing The Switch; Installing And Connecting A J-Ex4200 Switch - Dell PowerConnect J-EX4200 Hardware Manual

CHAPTER 9

Installing the Switch

Installing and Connecting a J-EX4200 Switch

Installing and Connecting a J-EX4200 Switch on page 87
Unpacking a J-EX4200 Switch on page 88
Mounting a J-EX4200 Switch on page 90
Mounting a J-EX4200 Switch on a Desk or Other Level Surface on page 91
Mounting a J-EX4200 Switch on Two Posts in a Rack or Cabinet on page 92
Mounting a J-EX4200 Switch on Four Posts in a Rack or Cabinet on page 96
Mounting a J-EX4200 Switch in a Recessed Position in a Rack or Cabinet on page 100
Mounting a J-EX4200 Switch on a Wall on page 100
The J-EX4200 switch chassis is a rigid sheet-metal structure that houses the hardware
components.
To install and connect a J-EX4200 switch:
Follow instructions in "Unpacking a J-EX4200 Switch" on page 88.
1.
Mount the switch by following instructions appropriate for your site:
2.
"Mounting a J-EX4200 Switch on Two Posts in a Rack or Cabinet" on page 92 (using
the mounting brackets provided)
"Mounting a J-EX4200 Switch on Four Posts in a Rack or Cabinet" on page 96 (using
the separately orderable four-post rack-mount kit)
"Mounting a J-EX4200 Switch in a Recessed Position in a Rack or Cabinet" on
page 100 (using the 2-in.-recess front brackets from the separately orderable
four-post rack-mount kit)
"Mounting a J-EX4200 Switch on a Desk or Other Level Surface" on page 91 (using
the rubber feet provided)
"Mounting a J-EX4200 Switch on a Wall" on page 100 (using the separately orderable
wall-mount kit)
Follow instructions in "Connecting Earth Ground to a J-EX Series Switch" on page 115.
3.
87