Front Panel Of A J-Ex4200 Switch - Dell PowerConnect J-EX4200 Hardware Manual

Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide
Table 5: Physical Specifications of the J-EX4200 Switch Chassis (continued)
Description
Chassis width
Chassis depth
Weight
Related
Documentation

Front Panel of a J-EX4200 Switch

6
Value
17.25 in. (43.82 cm)
19 in. (48.2 cm) with mounting brackets attached
Without power supply installed—17 in. (43.18 cm)
With power supply installed:
320 W AC power supply installed—17 in. (43.18 cm)
600 W or 930 W AC power supply installed—19.25 in. (48.9 cm)
J-EX4200 switch with 1 power supply: 16–18 lb (7.2–8.2 kg)
320 W AC power supply: 2.5 lb (1.1 kg)
600 W and 930 W AC power supplies: 3.1 lb (1.4 kg)
Rack Requirements for J-EX4200 Switches on page 63
Cabinet Requirements for J-EX4200 Switches on page 64
Mounting a J-EX4200 Switch on page 90
Installing and Connecting a J-EX4200 Switch on page 87
Installing and Removing J-EX4200 Switch Hardware Components on page 105
The front panel of a J-EX4200 switch consists of the following components:
Network ports—depending on the switch model, either of:
10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled for
Power over Ethernet (PoE)
100Base-FX/1000Base-X SFP ports for use with fiber-optic connections
Uplink module ports—SFP or SFP+ ports (The uplink module is an optional feature.)
LCD panel and the LCD navigation buttons
Chassis status LEDs
Network port LEDs
Figure 1 on page 7 shows the front panel of a J-EX4200 switch with 48 Gigabit Ethernet
ports. Figure 2 on page 7 shows the front panel of a J-EX4200 switch with 24 Gigabit
Ethernet ports. Figure 3 on page 7 shows the front panel of a J-EX4200-24F switch with
24 SFP ports for use with fiber-optic connectors.