Turning On The Power; Initial Unit Setup - Honeywell HRSD40F User Manual

If the System ID is set from 1 to 4, you must to press ID on the remote control and
number button (1 to 4) to control that DVR.
If you set the Unit ID of two or more DVRs to 0, you can control those DVRs with the
infrared remote control at the same time.

Turning On the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approximately
60 seconds to initialize.

Initial Unit Setup

Before using your DVR for the first time, you need to establish the initial settings. This
includes items such as:
•
•
•
•
•
•
•
•
You can set up these items using various screens and dialog boxes.
38
Note The functions of the infrared remote control buttons are identical
to the functions of the front panel buttons.
Time and date (see Setting Up the Date and Time
Display language (see
Camera (see Configuring Devices
Audio (see Configuring Audio Recording
Remote control (see
Record mode (see Configuring Recording Settings
Network (see Setting Up the DVR Network Connections
Password (see Adding a User
63.)
Changing the Language Setting
on page 66)
on page 69)
Connecting the Infrared Remote Control
on page 53
HRSD40F DVR User Guide
on page 46)
on page 42)
on page 37)
on page 74)
on page 55)
and Setting up Notifications on page