Satisfaction Guides; Satisfaction Guide For Paper Trays 1 And 2 - Xerox 6100BD - Phaser Color Laser Printer Manual

Satisfaction Guides

Satisfaction Guide for Paper Trays 1 and 2

Stock Reliable feeds may be
expected
Size 8 x 10 inches to 9 x 14
inches (203 x 254 mm to
229 x 356 mm)
Weight Substance 20 to 110 (75 to
200 g/m2)
Capacity Tray 1 - 1100 sheets,
substance 20 (75 g/m2)
Tray 2 - 600 sheets,
substance 20 (75 g/m2)
Type or Xerographic bond paper in
condition good condition
Drilled stock, fanned
thoroughly
Tab stock in perfectly flat
condition
DT6180 HandyBook
Paper Trays & Loading Media
Less reliable feeds may be
expected
Substance 16 to 19 (60 to 72
g/m2)
Slightly curled paper
Intermixed weights
Transparencies
Label stock
Adhesive drafting film
Paper with reinforced edges
Suggested alternatives
Stock smaller than 8 x 10
inches cannot be used.
For stock larger than 9 x 14
inches (229 x 356 mm), refer
to the tray 3 satisfaction
guide.
Weights outside the limits
shown are not
recommended.
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
For greater capacity, use
Tray 3.
Do not use excessively
curled paper
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
Use transparencies with a
white stripe.
Freshly printed offset prints,
use tray 3.
Refer to the "Using various
stocks" section for any stock
not defined in this guide.
21