Replace The Binder Tape Reel - Xerox 6100BD - Phaser Color Laser Printer Manual

Replace the Binder Tape Reel

1. Open the Finisher Doors.
2. Grasp the green handle on the Binder assembly and pull the drawer out until it stops. The
green handle is to the right of Paper Tray 3.
WARNING: All areas of the Binder assembly, including the Binder tape, are hot
(approximately 425 °F / 218 °C). Be very careful when working in this area.
3. Raise the handle on the pressure roll and remove the Binder tape from the drive roll. The
handle is located on the upper right side of the Binder assembly.
4. Rewind the Binder tape onto the tape reel.
5. Move the reel retainer, located on the end of the tape reel spindle, to the horizontal or
unlocked position. The reel retainer is a flat metal piece that pivots on the end of the tape
reel spindle.
DT6180 HandyBook
Replacing Consumables
34