Modify The Bindexer Capacity Number; Modify The Lighter / Darker Setting - Xerox 6100BD - Phaser Color Laser Printer Manual

Modify the Bindexer Capacity Number

If you are using software version 3.x and above:
1. From the DocuSP for DocuTech 2000 Series 61xx window, select [Printer Manager]. The
Printer Manager window will be displayed.
2. Select the [Stacking] tab.
3. Select the [Setting] button on the lower, right-hand side of the window. The Setting for All
Stackers window will be displayed.
4. Under Bindexer Capacity use the [Up] and [Down] arrows to modify the capacity or
enter a new bindexer capacity.
5. Select [OK] to save the selection.
If you are using software version 2.x and below:
1. From the DocuSP Print Services window, select the [Printer Manager] button. The Printer
Manager window will be displayed.
2. Select [Options] from the toolbar. A menu will be displayed.
3. Select [Finishing] from the menu. The Finishing window will be displayed.
4. Select the [Finishing tab.
5. Under the Stacker Set Up section, use Slide to Select New Bindexer Number.
6. Select [OK] to save the selection.

Modify the Lighter / Darker Setting

NOTE: You must be logged on as Trusted User or System Administrator to perform this task.
Only Trusted Users or System Administrators have access to changing the Image Quality
settings.
To modify the Lighter / Darker Setting using DocuSP software version 3.x or above:
1. In the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager]. The
Print Manager window will be displayed.
2. Select the [Image Quality] tab in the Printer Manager window. The Image Quality window
will be displayed.
3. Select [Printer Darkness].
4. Make sure the Darkness Mode is set for Normal Darkness, and select a lighter or darker
shade of gray depending on the desired effect.
5. Select [OK].
6. When an Information window is displayed stating 'The change to Darkness will take effect
on the next set/subset to be printed,' select [OK].
To modify the Lighter / Darker Setting using DocuSP software version 2.x or below:
1. In the DocuSP Print Services window, select [Printer Manager]. The Print Manager
window will be displayed.
2. Select [Options] from the toolbar. A menu will be displayed.
3. Select [Image Quality] from the menu. The Image Quality window will be displayed.
4. Select [Printer Darkness].
5. Make sure the Darkness Mode is set for Normal Darkness, and select a lighter or darker
shade of gray depending on the desired effect.
6. Select [Apply].
DT6180 HandyBook
Machine Maintenance
49