Disable Stock Size Checking - Xerox 6100BD - Phaser Color Laser Printer Manual

8. Disable Stock Size Checking

NOTE: You must be logged in as System Administrator to perform this task.
To disable Stock Size Checking using DocuTech software version 3.x:
1. From the DocuSP for DocuTech 2000 Series 61xx window, select [Printer
Manager]. The Printer Manager window will be displayed.
2. Select the [Paper Tray] tab.
3. Right-click on the tray(s) you want to disable stock size checking. A menu will
be displayed.
4. Select [Disable Stock Size Checking] from the menu. You will return to the
Paper Tray tab.
5. Under the third column from the left, make sure there is no icon for Stock Size
Checking. If there is an icon then Stock Size Checking has not been disabled.
To disable Stock Size Checking using DocuTech software version 2.x and below:
1. From the DocuSP Print Services window, select [Printer Manager]. The
Printer Manager window will be displayed.
2. Select [Options] from the toolbar. A menu will be displayed.
3. Select [Stock Size Checking]. A Stock Size Checking window will be
displayed.
4. Select the tray to remove the check mark and disable Stock Size Checking.
5. Select [OK].
NOTE: Stock size checking should be left disabled, as long as you are using
this paper or you have this problem. However, if this message occurs with all
paper types, or is a continuing problem, then a service call should be placed.
DT6180 HandyBook
Perform Printer Functions
149