Xerox 6100BD - Phaser Color Laser Printer Manual page 83

To clean the Q1203 sensor:
6. Place the short edge of the folded paper above the white rollers on the left side of the Top Tray
Feeder, as near to the front of the machine as the feeder will let you. Push the paper edge under
the curved metal lip, past the near side of the black roller, and underneath the Q1202 Sensor.
7. Brush the folded piece of paper under the Q1203 Sensor a couple of times to clear any
obstructions.
To clean the Q1202 sensor:
8. Take the folded paper and place the short edged side into the area of the opened access plate. If
you hold the paper against the right side of that opening and slide the short edge toward you,
beneath the white rollers, you can work the paper under the sensor. Make sure that area is clear
from all obstructions.
9. Remove the paper, then close the access plate.
10. Lower the Finisher Top Cover until you hear it latch.
11. Close the Finisher Doors.
DT6180 HandyBook
Solutions in Alphabetical Order
83