Xerox 6100BD - Phaser Color Laser Printer Manual page 93

7. Grasp the handle and rotate it to the left.
8. Remove any paper in this area.
9. Rotate the handle to the right, to the latched position. If the handle does not stay in position when
released, it is not latched properly.
10. Close the Finisher Door.
To clear areas 12 and 13:
1. Open the Finisher Top Cover by pushing up on the handle in the top center of the cover.
2. On the left side of the Finisher Top Cover there is a mechanical assembly. There is a green handle
on the left side of this assembly. This is area 12.
3. Grasp the green handle and rotate it to the left to open the baffle.
4. Remove any paper under the baffle.
5. Close the baffle.
6. Locate the green handle on the right side of the mechanical assembly. This is area 13.
DT6180 HandyBook
Solutions in Alphabetical Order
93