CHAPTER 3
F. Separation Pad
1. Removal from the printer
1) Open the multi-purpose tray.
2) Remove the cover.
3) Remove the manual feeding pick-up
roller.
4) Use a flat-bladed screwdriver to remove
the separation pad.
Separation pad
Figure 3-3-23
3 - 20
G. Pick-up/Feed/Separation Rollers
1. Removal from the printer
1) Pull out the upper and lower cassettes.
2) Grasp the knobs of each roller and pull
the rollers out of the printer.
Pick-up roller
Feed roller
Separation roller
Figure 3-3-24
Pick-up roller
Feed roller/Separation roller
Figure 3-3-25
Note: Be sure to replace the feed roller
and the separation roller together.