2. Removal from the printer
a. Fixing unit/scanner unit fan (FM1)
1) Remove the right rear and rear covers.
2) Remove the upper cover unit.
3) Disconnect the connector.
Connector
Figure 3-1-18
4) Disconnect the connector.
5) Remove the cable tie, and then remove
the cable from the cable guide.
Connector
Cable tie
Cable
Cable guide
Figure 3-1-19
6) Remove the cable from the guide.
7) Unhook the claw, then remove the fan
duct.
Cables
Cable guide
Claw
Fan duct
Figure 3-1-20
8) Remove the 2 screws, and then the
fixing unit/scanner unit fan.
Screws
Fixing unit/scanner unit fan
Figure 3-1-21
CHAPTER 3
3 - 7