Canon LBP 2460 - B/W Laser Printer Service Manual page 184

CHAPTER 3
5) Remove the screw and take out the pick-
up motor.
Screw Pick-up motor
Figure 3-8-11
Note: After fastening the guides to the
rack, attach the gear by spreading
the guides apart.
3 - 42
4. Removal of the Envelope Feeder
Driver PCB
1) Remove the rear, front, lower and upper
covers.
2) Remove the envelope guides.
3) Remove the 2 connectors and the screw.
Connectors Screw
Figure 3-8-12
4) After removing the sensor lever, take
out the envelope feeder driver PCB.
Sensor lever
Envelope feeder driver PCB
Figure 3-8-13