Canon LBP 2460 - B/W Laser Printer Service Manual page 185

5. Removal of the Drive Unit
1) Remove the pick-up motor following
steps 1 to 5 on page 3-40.
2) Remove the screw.
Screw
Figure 3-8-14
3) Remove the drive unit by taking off the
2 E-ring and removing the 3 screws.
E-rings Screws
Drive unit
Figure 3-8-15
6. Removal of the Envelope Feeder Pick-
up Roller
1) Follow steps 1 to 5 on page 3-40 and
remove the pick-up motor.
2) Remove the drive unit.
3) Remove the 2 bushings and 2 screws,
then take out the pick-up roller shaft.
Bushings Gear
Pick-up roller
Figure 3-8-16
4) Remove the 2 E-rings and 2 bushings,
then take out the pick-up roller shaft.
CHAPTER 3
3 - 43