Duplexing Unit - Canon LBP 2460 - B/W Laser Printer Service Manual

IX. DUPLEXING UNIT
1. Removal of the Upper Guide
1) Remove the 4 screws, then the upper
guide.
Screws Upper guide
Figure 3-9-1
Note: When installing the upper guide,
ensure that the guide is on the
outside.
Upper guide Guide
Figure 3-9-2
2. Removal of the Lower Guide
1) Remove the upper cover.
2) Remove the connector.
3) Take out the 2 screws, then the guide.
Connector Screws
Guide
Figure 3-9-3
4) Remove the 2 springs, then the switch
back guide.
Springs Switch back guide
Figure 3-9-4
CHAPTER 3
3 - 45