Canon LBP 2460 - B/W Laser Printer Service Manual page 182

CHAPTER 3
d. Upper Cover
1) Remove the rear and front covers.
2) Remove the screw.
Screw
Figure 3-8-4
3) With a flat nosed screwdriver, unfasten
the snaps on both sides. Remove the
upper cover and spring.
Snaps Upper cover
Figure 3-8-5
3 - 40
Notes: 1. Ensure that the separation guide
and upper cover are removed as
one unit.
However, in the event that the
separation guide has already
been removed, be sure to follow
the position
directions (refer to page 4-10)
when re-installing.
2. Check that the separation roller
pressure spring is correctly
installed when reassembling.
Separation roller pressure spring
Figure 3-8-6
adjustment