Table of Contents
Advertisement
Charging the Dog Collar Device
To prevent corrosion, thoroughly dry the contacts on the dog collar device and the surrounding area before
connecting the charging clip.
NOTE: Your dog collar device may look different than the device pictured.
You should fully charge the battery before you use the dog collar device for the first time. Charging a fully
depleted battery takes about five hours.
1 Snap the charging clip
2 Plug the small end of the power cable into the USB port on the charging clip.
3 Plug the power cable into a power source.
The status LED is solid red when the collar is charging.
4 After the status LED turns solid green, remove the charging clip from the collar.
Turning On the Device
• On the handheld device, press the power button.
• On the dog collar device, hold the power button until the status LED flashes and the collar beeps.
Turning Off the Device
• On the handheld device, hold the power button until the LCD screen turns off.
• On the dog collar device, hold the power button until the status LED turns solid red.
Selecting a Language
When you turn on your device for the first time, you will select the device language from a list of available
languages. You can change the language setting from the System settings.
1 From the main menu, select
2 Select a language.
Using the Touchscreen
• Select
to open a menu.
• Select
to return to the home screen.
• Select
to return to the previous page.
• If you are more than one menu away from the home screen, select and hold
• If scroll controls are enabled, select
Getting Started
NOTICE
onto the dog collar device
> System > Language.
and
to scroll
.
to return to the home screen.
(Accessibility Settings,
page 37).
5
Advertisement
Table of Contents
