Pimsn Messages; Platform Messages - Cisco 3845 - Security Bundle Router Manual

PIMSN Messages

PIMSN Messages
Error Message PIMSN-6-IGMPSN_GLOBAL: PIM Snooping global runtime mode [chars] due to
IGMP Snooping [chars].
Error Message PIMSN-6-IGMPSN_VLAN: PIM Snooping runtime mode on vlan [dec] [chars]
due to IGMP Snooping [chars].

PLATFORM Messages

Error Message PLATFORM-1-CRASHED: [chars].
Error Message PLATFORM-3-NO_HARDWARE_RESOURCES: Not enough hardware resources.
Shutting down [chars].
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-30
When IGMP snooping is disabled, Protocol Independent Multicast (PIM) snooping is
Explanation
disabled. When IGMP snooping is re-enabled, PIM snooping is re-enabled. The first [chars] is the
PIM snooping mode, and the second [chars] is the IGMP snooping mode.
No action is required.
Recommended Action
When IGMP snooping is disabled, PIM snooping is disabled. When IGMP snooping is
Explanation
re-enabled, PIM snooping is re-enabled. [dec] is the VLAN ID, the first [chars] is the PIM snooping
mode, and the second [chars] is the IGMP snooping mode.
No action is required.
Recommended Action
The system is trying to display the failure message from the previous failure. [chars] is
Explanation
the description of the error message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
There are too many VLANs and routed ports. [chars] is the short interface name, such
Explanation
as Gi0/1, or the VLAN name, such as VLAN0002.
Reduce the total number of VLANs and routed ports to less than 1023. To
Recommended Action
preserve configurations and connections across reboots, save the configuration.
Chapter 2 Messages and Recovery Procedures
"Error Message Traceback Reports" section on
OL-23408-01