Ifmgr Messages - Cisco 3845 - Security Bundle Router Manual

IFMGR Messages

Error Message IDBMAN-3-VLANNOTSET: [chars]: Vlan [dec] not set since it already has
Vlan [dec].
Error Message IDBMAN-4-ACTIVEPORTSINAGGPORT: [chars]( [dec] / [dec] ) has [dec]
active ports, but is being removed.
IFMGR Messages
Error Message IFMGR-3-IFINDEX_PERSIST_ENTRY_CORRUPT: [chars] seems to be corrupted.
Trying to read [dec] size
Explanation
number of bytes being read from the IfIndex table when the corruption was detected.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-24
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
An interface VLAN was not set to the requested value because of an internal error.
Explanation
[chars] is the interface name. The first [dec] is the new VLAN number, and the second [dec] is the
currently assigned VLAN number.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
An internal error removed an aggregate port with active ports. [chars] is the
Explanation
port-channel name, and the ([dec] / [dec]) are the slot and port number (slot/port). The last [dec] is
the number of currently active ports.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The IfIndex table is corrupted. [chars] is the path to the IfIndex file, and [dec] is the
Recommended Action Use the delete nvram:ifindex-table privileged EXEC command to delete the
IfIndex table.
Chapter 2 Messages and Recovery Procedures
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
OL-23408-01