Chapter 2
Messages and Recovery Procedures
SUPQ Messages
Error Message SUPQ-3-THROTTLE_CPU_QUEUE: Invalid application ID [dec] used for
throttling.
Error Message SUPQ-4-CPUHB_RECV_STARVE: [chars].
Error Message SUPQ-4-CPUHB_SLOW_TRANSMIT: [chars].
Error Message SUPQ-4-CPUHB_TX_FAIL: [chars].
OL-23408-01
An application has passed an invalid application ID for throttle check. [dec] is the
Explanation
internal application identifier.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page
1-5.
The system has detected that messages directed to the CPU are delayed. [chars] is the
Explanation
detailed error message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page
1-5.
The system is warning you about a slowdown of the sending interface. [chars] is the
Explanation
detailed error message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page
1-5.
The system is warning you about the sending interface discarding the heartbeat
Explanation
message. [chars] is the detailed error message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
SUPQ Messages
2-67