Cisl Messages; Ec Messages - Cisco 3845 - Security Bundle Router Manual

Chapter 2 Messages and Recovery Procedures

CISL Messages

Error Message CISL-1-DEVICE_CERT_NOT_PRESENT: Device Certificate used for licensing
is not present

EC Messages

Error Message EC-4-NOMEM: Not enough memory available for [chars].
Error Message EC-5-BUNDLE: Interface [chars] joined port-channel [chars].
Error Message EC-5-CANNOT_ALLOCATE_AGGREGATOR: Aggregator limit reached, cannot
allocate aggregator for group [dec].
OL-23408-01
An error occurred while retrieving the device certificate used for licensing.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The Link Aggregation Control Protocol (LACP) or the Port Aggregation Protocol
Explanation
(PAgP) EtherChannel could not obtain the memory it needed to initialize the required data
structures. [chars] is the data structure name.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The listed interface joined the specified EtherChannel. The first [chars] is the physical
Explanation
interface, and the second [chars] is the EtherChannel interface.
No action is required.
Recommended Action
A new aggregator cannot be allocated in the group. [dec] is the affected group.
Explanation
Recommended Action Change the port attributes of the ports in the group so that they match and join
the same aggregator.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
CISL Messages
2-9