Port_Security Messages - Cisco 3845 - Security Bundle Router Manual

Chapter 2 Messages and Recovery Procedures
Error Message PM-4-PORT_BOUNCED: Port [chars] was bounced by [chars].
Error Message PM-4-TOO_MANY_APP: application '[chars]' exceeded registration limit.
Error Message PM-4-UNKNOWN_HOST_ACCESS: Invalid Host access value ([dec]) is
received.

PORT_SECURITY Messages

Error Message PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred caused
by MAC [enet] on port [chars].
OL-23408-01
During a change-over when the port was in the link-down state, the port manager
Explanation
restarted the port. A port can be restarted only when the port data structures are not consistent in the
active and standby supervisors. Active ports in the link-down state return to the link-up state when
the port is restarted. The first [chars] is the port number, and the second [chars] is the re-activation
event.
No action is required.
Recommended Action
The port manager detected an invalid request. [chars] is the application.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The host access table is being accessed with an invalid host access value. [dec] is the
Explanation
value that is received.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
Explanation An unauthorized device attempted to connect on a secure port. [enet] is the MAC
address of the unauthorized device, and [chars] is the secure port.
Identify the device that attempted to connect on the secure port. Notify your
Recommended Action
network system administrator of this condition.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
PORT_SECURITY Messages
2-45