Facility Codes; How To Read System Messages - Cisco 3845 - Security Bundle Router Manual

System Message Overview
This guide describes the Cisco ME 3800X and 3600X Ethernet Access switches system messages.
During operation, the system software sends these messages to the console (and, optionally, to a logging
server on another system). Not all system messages mean problems with your system. Some messages
are informational, and others can help diagnose problems with communications lines, internal hardware,
or the system software.
For information about system messages that are not Cisco ME switch platform-specific, see the Cisco
Note
IOS Software System Messages for Cisco IOS Release 12.2S.
•
•

How to Read System Messages

System log messages can contain up to 80 characters and a percent sign (%), which follows the optional
sequence number or time-stamp information, if configured. Messages appear in this format:
seq no:timestamp: %facility-severity-MNEMONIC:description
By default, a switch sends the output from system messages to a logging process.
Each system message begins with a percent sign (%) and is structured as follows:
%FACILITY-SEVERITY-MNEMONIC: Message-text
•
Table 1-1
Facility Code
ACLMGRR
AUTHMGR
OL-23408-01
How to Read System Messages, page 1-1
Error Message Traceback Reports, page 1-5
FACILITY is two or more uppercase letters that show the facility to which the message refers. A
facility can be a hardware device, a protocol, or a module of the system software.

facility codes.

These messages are described in
order by facility code with the most severe (lowest number) errors described first.
Facility Codes
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
C H A P T E R
Chapter 2, "Messages and Recovery Procedures,"
Description
ACL manager
Authorization manager
1
Table 1-1
in alphabetical
Location
"ACLMGR Messages" section on
page 2-3
"AUTHMGR Messages" section on
page 6
lists the
1-1