Memory Supported; Post Error Codes - Intel S1200BTS Specification

Product specification
Hide thumbs Also See for S1200BTS:
Table of Contents

Advertisement

Functional Architecture
The memory channels are named as ―Channel A‖ and ―Channel B‖.
The memory slots are named as ―Slot1‖ and ―Slot2‖ on each channel. Slot1will be the
farthest from the processor socket.
DIMMs are named to reflect the channel and slot in which they are installed:
o Channel A, Slot1 is ―DIMM_A1‖.
o Channel A, Slot2 is ―DIMM_A2‖.
o Channel B, Slot1 is ―DIMM_B1‖.
o Channel B, Slot2 is ―DIMM_B2‖.
3.2.1

Memory Supported

®
The Intel
Server Board S1200BT family supports various DDR3 DIMM modules of different
types and sizes and speeds.
In this section, the statements of support are subject to qualification in two ways:
For S1200 Server Boards with an SNB-DT processor, the Server Board and the BIOS
may support:
DIMMs composed of Dynamic Random Access Memory (DRAM) chips using 1 Gb, 2
Gb, or 4 Gb technology
DIMMs using x8 DRAM technology only
DIMMs organized as Single Rank (SR) or Dual Rank (DR)
DIMM sizes of 1 GB, 2 GB, 4 GB, or 8 GB
DIMM speeds of 1066 or 1333 MT/s (megatransfers/second)
Only Unregistered (Unbuffered) DIMMs (UDIMMs) are supported
Only Error Correction Code (ECC) enabled DIMMs are supported
UDIMMs may or may not have thermal sensors
Note: UDIMMs must be ECC, and may or may not have thermal sensors.
S1200BT BIOS has the following limitations:
No support for LV DIMMs
No support for RDIMMs
All channels in a system will run at the fastest common frequency
Mixing ECC and non-ECC UDIMMs anywhere on the platform is not supported
Static Closed Loop Thermal Throttling (CLTT) supported via BMC (requires ECC DIMMs
with thermal sensor)
3.2.2

Post Error Codes

The range {0xE0 - 0xEF} of POST codes is used for memory errors in early POST. In late
POST, this same range of POST code values is used for reporting other system errors.
0xE8 - No Usable Memory Error: If no usable memory is available, the BIOS emits a
beep code and displays POST Diagnostic LED code 0xE8 and halts the system.
18
Intel order number G13326-003
Intel® Server Board S1200BT TPS
Revision 1.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs1200btsS1200btlS1200bt

Table of Contents