Supported Memory; Table 3. Udimm Support Guidelines - Intel S1200SPL Technical Spesification

Intel® Server Board S1200SP Family Technical Product Specification
Gb and 8 Gb DDR4 DRAM device technologies are supported
•
Using 4 Gb DRAM device technologies, the largest system memory capacity possible is 32 GB,
-
assuming Dual Channel Mode with four x8 dual ranked DIMM memory configuration
The memory channels are named as Channel A and Channel B.
•
The memory slots are named as Slot1 and Slot2 on each channel. Slot2 is the nearest from the processor
•
socket.
DIMMs are named to reflect the channel and slot in which they are installed:
•
Channel A, Slot1 is DIMM_A1.
-
Channel A, Slot2 is DIMM_A2.
-
Channel B, Slot1 is DIMM_B1.
-
Channel B, Slot2 is DIMM_B2.
-
3.3.1

Supported Memory

Single Ranked x8 unbuffered ECC
•
Dual Ranked x8 unbuffered ECC
•
Ranks
Per
DIMM
Memory Capacity Per DIMM
and
Data
Width
SRx8
4GB
ECC
DRx8
8GB
ECC
Note: Note: In case of using 2400 MHz memory modules with Intel E3-1200 v5 processor, the speed of the
memory will be reduced to 2133 MHz.
18

Table 3. UDIMM Support Guidelines

Slot per Channel (SPC) and DIMM Per Channel (DPC)
1866, 2133
8GB
2400 (only Intel E3-1200 V6)
1866, 2133
16GB
2400 (only Intel E3-1200 V6)
Speed (MT/s) and Voltage Validated by
2 Slots per Channel
1DPC
1.2V
2DPC
1.2V
1866, 2133
2400 (only Intel E3-1200 V6)
1866, 2133
2400 (only Intel E3-1200 V6)