Embedded Platform Debug - Intel S1200BTS Specification

Platform Management
user does not have privilege to execute. (e.g. if a user does not have privilege to power control,
then the item shall be displayed in grey-out font in that user's UI display). The web GUI also
provides a launch point for some of the advanced features, such as KVM and media redirection.
These features are grayed out in the GUI unless the system has been updated to support these
advanced features.
A partial list of additional features supported by the web GUI includes:

Presents all the Basic features to the users.

Power on/off/reset the server and view current power state.

Virtual front panel display and overall system health.

Provides embedded firmware version information.

Configuration of various IPMI parameters (LAN parameters, users, passwords, etc.)

Configuration of alerting (SNMP and SMTP).

Display system asset information for the product, board, and chassis.

Display of BMC-owned sensors (name, status, current reading, enabled thresholds),
including color-code status of sensors.

Automatic refresh of sensor data with a configurable refresh rate.

On-line help.

Display/clear SEL (display is in easily understandable human readable format).

Supports major industry-standard browsers (Internet Explorer and Mozilla Firefox).

Automatically logs out after user-configurable inactivity period.

The GUI session automatically times-out after a user-configurable inactivity period. By
default, this inactivity period is 30 minutes.
 Embedded Platform Debug feature - Allow the user to initiate a ―diagnostic dump‖ to a
file that can be sent to Intel

Display of power statistics (current, average, minimum, and maximum) consumed by
the server.
4.2.5

Embedded Platform Debug

The Embedded Platform Debug feature supports capturing low-level diagnostic data (applicable
MSRs, PCI config-space registers, etc.). This feature allows a user to export this data into a file
that is retrievable via the embedded web GUI, as well as through host and remote IPMI
methods, for the purpose of sending to an Intel
capability. The files are compressed, encrypted, and password protected. The file is not meant
to be viewable by the end user but rather to provide additional debugging capability to an Intel
support engineer.
40
®
for debug purposes.
®
engineer for an enhanced debugging
Intel order number G13326-003
Intel® Server Board S1200BT TPS
®
Revision 1.0