Figure 22. Pci Configuration Screen - Intel S1200BTS Specification

BIOS User Interface
Advanced
PCI Configuration
Maximize Memory below 4GB
Memory Mapped I/O above 4GB
Onboard Video
Dual Monitor Video
Wake on LAN (PME)
Onboard NIC1 ROM
Onboard NIC2 ROM
Onboard NIC3 ROM
Onboard NIC4 ROM
Onboard NIC5 ROM
Onboard NIC iSCSI ROM
NIC 1 MAC Address
NIC 2 MAC Address
NIC 3 MAC Address
NIC 4 MAC Address
NIC 5 MAC Address
10. Wake on LAN (PME)
Option Values:
Help Text:
Enables or disables PCI PME function for Wake on LAN capability from LAN
adapters.
Comments:
Events (PME) and ACPI Table entries required for Wake on LAN (WOL). However, note
that this will enable WOL only with an ACPI-capable Operating System which has the
WOL function enabled.
6.5.2.10 System Acoustic and Performance Configuration
The System Acoustic and Performance Configuration screen allows the user to configure the
thermal control behavior of the system in order to balance performance and acoustics with
power consumption and heat generation.
74
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
<MAC #>
<MAC #>
<MAC #>
<MAC #>
<MAC #>

Figure 22. PCI Configuration Screen

Enabled
Disabled
Enables/disables PCI/PCIe PME# signal to generate Power Management
Intel order number G13326-003
Intel® Server Board S1200BT TPS
Revision 1.0