Processors
The board supports a single Intel Pentium III processor or Intel Celeron processor above 533 MHz.
Processors are not included with the server board and must be purchased separately.
The processor connects to the server board through a PGA370 socket. The board supports the
processors listed in Table 2.
Table 2.
Supported Processors
Type
Intel Pentium III processor in an
FC-PGA2 package
Intel Pentium III processor in an
FC-PGA package
Celeron processor in an FC-PGA
package
* Support of the 1 GHz Pentium III is dependent upon package type. S815EBM1 Fan Heatsink (FHS) only supports
FCPGA2 packaging type – customers can determine S815EBM1 support at this speed by product s-spec. For the latest
information on processor support for the boards, refer to the Intel server board web site at:
http://support.intel.com/support/motherboards/server/S815EBM1/
For instructions on installing or upgrading the processor, see Chapter 2.
Memory
The board supports 168-pin SDRAM DIMMs as defined below:
•
168-pin SDRAM Dual Inline Memory Modules (DIMMs) with gold-plated contacts
•
Three DIMM slots are provided for flexible memory configurations
•
133 MHz SDRAM up to two double row DIMMs, or one double row DIMM and two single
row DIMMs
•
100 MHz SDRAM up to three double row DIMMs
•
Minimum system memory: 32 MB
•
Maximum system memory: 512 MB
•
Unbuffered single or double row DIMMs
•
Serial Presence Detect (SPD) memory
•
Non-ECC and ECC DIMMs (ECC DIMMs will operate in non-ECC mode only)
•
3.3 V memory (only)
•
Basic Non-SPD support
•
Mixed speed DIMM configuration will default to the slowest speed DIMM installed
Description
Designation
1.0 GHz*, 1.2 GHz
1.13 GHz, 1.26 GHz
533EB, 600EB, 667, 733, 800B, 866,
and 933 MHz
1.0 GHz*
500E, 550E, 600E, 650, 700, 750,
800, and 850 MHz
800 and 850 MHz
533A, 566, 600, 633, 667, 700, 733,
and 766 MHz
System Bus
L2 Cache
Frequency
Size
133 MHz
512 KB
133 MHz
256 KB
133 MHz
256 KB
100 MHz
256 KB
100 MHz
128 KB
66 MHz
128 KB
11