Editing Camera Wired Network Settings - Lorex Vantage LNC116 Instruction Manual

Android App
directly to the notifications area on your device.
To enable Push Alarm Notifications:
1. In Camera List, tap
2. Tap Alarm Notification.
3. Under Motion, tap to select ON to enable Push Alarm Notifications when motion is
detected using video motion detection or OFF to disable.
4. Under PIR, tap to select ON to enable Push Alarm Notifications when motion is
detected using the PIR motion sensor or OFF to disable.
5. Under Sound, tap to select ON to enable Push Alarm Notifications when sound is
detected by the camera or OFF to disable. Under Sound Sensitivity, select a
sensitivity for Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
6. Tap Update to save your settings.

7.3.8 EDITING CAMERA WIRED NETWORK SETTINGS

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
122
next to the camera you would like to edit.
Enable/disable push notifications for
video motion detection
Enable/disable push notifications for
sound
Select sensitivity for sound push notifications
Enable/disable push notifications for PIR
motion detection
Push notification sent to
device notifications list