Lorex Vantage LNC116 Instruction Manual page 157

Infrared LED turns on to enable night vision.
To configure Day/Night mode:
1. Select one of the following:
• Automatic day and night mode switch: Camera will automatically switch between
day mode or night mode, based on the amount of light in the room.
• Scheduled time of night mode: Camera will switch between day mode and night
mode at a scheduled times each day. If using this option, use the first set of drop-down
menus to select (in 24-hour time) what time the camera will switch to night mode
and the second set of drop-down menus to select when the camera will return to
day mode.
• Manual night mode control: Manually select day mode or night mode. If using this
option, under Mode, select Day for day mode or Night for night mode.
Start of night mode
(8:00 PM)
Select day or night mode
Configuring Camera Settings using a Web Browser
Return to day mode
(6:00 AM)
141