Lorex Vantage LNC116 Instruction Manual page 37

3. Tap Camera Settings. Enter the camera's admin username and password. By
default, the admin username is admin and the password is left blank. Tap OK.
4. Tap Network then WiFi Network.
5. Slide Wi-Fi to ON. The camera scans for available networks in range.
6. Tap the name of your WiFi network, enter the password, and tap OK.
7. Wait for the update to complete.
8. Remove the Ethernet cable from the camera. It will connect to the wireless network.
When it is connected, the blue Network LED will be on or flashing.
9. Press Camera Settings, ID/Password, and then Back to exit the edit camera screen.
Network
WiFi Network
Slide Wi-Fi to ON
Tap your WiFi
network
Getting Started
21