Lorex Vantage LNC116 Instruction Manual page 165

for alarms and recording. You can configure up to 12 schedules.
To create a schedule for alarms or recording:
1. First, you must enable alarms or recording to use the schedule.
2. Check which alarm or recording types will use this schedule:
• Email/ftp Alarm: Check to use this schedule for Email Alarms. Select Motion
triggered to send an email alarm based on video motion, select PIR triggered to
use the PIR motion sensor, or select both.
• Speaker Alarm: Check to use this schedule for Email Alarms. Select Motion triggered
to create an audio alarm based on video motion, select PIR triggered to use the PIR
motion sensor, or select both.
• NAS Record: Check to use this schedule for NAS recording. Select Continuous for
the camera to record continuously during the scheduled time. Select Motion
triggered to record when video motion is triggered during the scheduled time, select
PIR triggered to record when the PIR motion sensor is triggered during the
scheduled time or select both.
• SD Card Recording: Check to use this schedule for microSD recording. Select
Continuous for the camera to record to microSD continuously during the scheduled
time. Select Motion triggered to record when video motion is triggered during the
scheduled time, select PIR triggered to record when the PIR motion sensor is
triggered during the scheduled time or select both.
3. Select one of the following to configure the times that will be used for this schedule:
• Every week: Create a weekly recording schedule. Check the days you would like the
schedule to apply to. Under During time, enter the start time for the schedule on
the left and the end time for the schedule on the right.
Configuring Camera Settings using a Web Browser
Select Recording or
alarm types for the
schedule
Configure schedule
times
Click Add Schedule
149